Henan Minmetals East New Materials CO. LTD.
Henan Minmetals East New Materials CO. LTD.
Tipo de Pago:L/C,T/T
Incoterm:FOB,CFR,CIF
Cantidad de pedido mínima:100 Kilogram
transporte:Ocean,Land,Air,Express
Hafen:QINGDAO,SHANGHAI,GUANGZHOU
$10≥100Kilogram
Modelo: HJSIL R272
Marca: Sílice hjsil® fumed
Lugar De Origen: porcelana
Grado: Grado industrial
Paquete: 10 kg
transporte: Ocean,Land,Air,Express
Apoyo sobre: 100 MT / MONTH
HS-Code: 28112290
Hafen: QINGDAO,SHANGHAI,GUANGZHOU
Tipo de Pago: L/C,T/T
Incoterm: FOB,CFR,CIF
Datos físicos y químicos:
| Properties and test methods | Unit | Typical Value | Standardization |
| Specific surface area (BET) | m2/g | 110 ± 25 | GB/T 20020 |
| pH value (in 4% dispersion) | 3.8 ~ 5.0 | GB/T 20020 | |
| Loss on drying (2 hours at 105 °C) | Wt% | ≤ 1.0 | GB/T 20020 |
|
Loss on ignition (2 hours at 1000 °C,based on material dried for 2 hours at 105 °C) |
Wt% | ≤ 2.0 | GB/T 20020 |
| Sieve residue (45 μm) | mg/kg | ≤ 250 | GB/T 20020 |
| Silica content (based on ignited material) | Wt% | ≥ 99.8 | GB/T 20020 |
|
Tamped density (based on material dried for 2 hours at 105 °C) |
g/dm³ | 40 ~ 60 | GB/T 20020 |
|
Carbon content (based on material dried for 2 hours at 105 °C) |
Wt% | 0.6 ~ 1.2 | GB/T 20020 |
Sílice hidrofílica de humo
| Calificaciones de hjsil | Área de superficie de BET [M2/G] | Pérdida en el secado [WT.%] | ph | Contenido de carbono [WT.%] | Pérdida de encendido [WT.%] | Residuo de tamiz [WT.%] | Contenido de sílice [WT.%] | Tampado densidad [G/L] |
| HJSIL 150 | 150 ± 25 | ≤ 1.5 | 3.6 ~ 4.5 | ≤ 0.2 | ≤ 2.5 | ≤ 0.05 | ≥ 99.8 | 40 ~ 60 |
| HJSIL 200 | 200 ± 25 | ≤ 1.5 | 3.6 ~ 4 .5 | ≤ 0.2 | ≤ 2.5 | ≤ 0.05 | ≥ 99.8 | 40 ~ 60 |
| HJSIL 300 | 300 ± 25 | ≤ 1.5 | 3.6 ~ 4.5 | ≤ 0.2 | ≤ 2.5 | ≤ 0.05 | ≥ 99.8 | 40 ~ 60 |
| HJSIL 380 | 380 ± 30 | ≤ 1.5 | 3.6 ~ 4.5 | ≤ 0.2 | ≤ 2.5 | ≤ 0.05 | ≥ 99.8 | 40 ~ 60 |
Sílice hidrofóbica de humo
| Calificaciones de hjsil | Área de superficie de BET [M2/G] | Pérdida en el secado [WT.%] | ph | Contenido de carbono [WT.%] | Contenido de sílice [WT.%] | Densidad tampizada [G/L] | Pérdida de encendido [WT.%] | Tratado con |
| HJSIL R110 | 100 ± 2 0 | ≤ 0 . 5 | 4.0 ~ 7 . 0 | 3.5 ~ 5 . 5 | ≥ 99.8 | 40 ~ 60 | ≤ 4.0 | PDMS |
| HJSIL R272 | 110 ± 20 | ≤ 0 . 5 | 3.8 ~ 5.0 | 0.6 ~ 1.2 | ≥ 99.8 | 40 ~ 60 | ≤ 2.0 | Dds |
| HJSIL R274 | 170 ± 20 | ≤ 0 . 5 | 3.8 ~ 5.0 | 0.7 ~ 1.3 | ≥ 99.8 | 40 ~ 60 | ≤ 2.0 | Dds |
| HJSIL R620 | 180 ± 20 | ≤ 0 . 5 | 5.5 ~ 7.5 | 1.6 ~ 2.0 | ≥ 99.8 | 40 ~ 60 | ≤ 4.0 | HMDS |
| HJSIL R622 | 260 ± 30 | ≤ 0 . 5 | 5.5 ~ 7.8 | 2.8 ~ 4.0 | ≥ 99.8 | 40 ~ 60 | ≤ 4.0 | HMDS |
Contact Now